Torch Down/Mod-Bit Roofs Liquid Rubber Coatings

It’s inevitable that Torch Down and Mod-Bit Roofs will begin to break down over time. Liquid Rubber Canada offers an easy DIY solution by bridging the joints with Liquid Rubber Seam Tape and coating the surface with Liquid Rubber Waterproof Sealant or Liquid Rubber Colour Waterproof Sealant. For about a quarter of the cost, you can add approximately 10 years to your roof.

Steps

  1. Ensure a clean, dry surface and substrate: Do not coat over saturated roofs
  2. Bridge joints, seams, vents, skylights etc., with Liquid Rubber Seam Tape
  3. Apply Liquid Rubber Waterproof Sealant or Liquid Rubber Coloured Waterproof Sealant to entire roof
  4. COVERAGE – 50 sq ft / G (3.78L) per coat. Minimum of three heavy coats
  5. Apply the next heavy coat when the product is dry to the touch and nothing is wet underneath.  Tacky is ok
  6. Can be sprayed, brushed and rolled.
  7. Avoid hot, direct sunlight during application
  8. Apply above 10C
  9. Remove Painters Tape while still wet
  10. See below for products used

Tips

Useful Links

Liquid Rubber

Torch Down/Mod-Bit Roof Case Study

Liquid Rubber

Torch Down/Mod-Bit Roof Case Study 2

Liquid Rubber

Waterproof Sealant Application Guideline

Liquid Rubber

Seam Tape Application Guideline

Colors

Original Black

Brilliant White

Light Grey

Med Grey

Dark Grey

Tan

Brown

Hunter Green

Tintable

Due to Computer Monitors, Colours may not be exactly as shown

Videos

How to waterproof the field of a flat or low slooped roof - Liquid Rubber

Mod-Bit/Torch Down Roof Repair with Liquid Rubber

Liquid Rubber applied 3 Course Method using Geo Textile

Liquid Rubber Seam Tape applied to Flat Seam

Applying Seam Tape in Corners - Liquid Rubber Seam Tape

Liquid Rubber Seam Tape applied to a Drain

DIY APPLICATION

Check all our DIY applications

CONTACT US

Get advice from experts